Back 

Online Store
Above Ground Swimming Pools
Above Ground Swimming Pool Liners
Above Ground Swimming Pool Filter Systems
Above Ground Swimming Pool Pumps
Swimming Pool Filters
In-ground Swimming Pool Pumps
Spa Cover Lifts and Steps
Spa Chemicals
Swimming Pool Heaters
Chlorine Generators, Control Systems,
Chlorinators, Chlorine Feeders, Mineral Sytems
Pool Cleaners
Pool Chemicals
Test Kits
Maintenance Equipment
Swimming Pool Accessories
Replacement Pool and Spa Motors
Solar Covers
Spas
Toys
Winter
Replacement Cartridges
Sta-Rite Replacement Cartridges
Electrical Supplies
Spa and Hot Tub Parts
Bulk Pool Chemicals
Pool Decks
 

Vac Alert SVRS Lift - Applications less than 24" below water surf

The Vac-Alert Model VA-2000L is a Safety Vacuum Release System (SVRS) designed for suction lift applications. Suction lift in this case applies to all applications where the circulating pump suction is either at or above the level of the pool water surface. This unit incorporates a 0.170” diameter orifice opening installed below the surge tube section. This orifice opening is sized to prevent nuisance tripping of the SVRS unit caused by high vacuum surges typical of many pump start-up conditions.

When a swimmer becomes stuck to a drain or suction outlet in a swimming pool, spa, wading pool, or hot tub, the force of the filtration system can be tremendous. This “suction entrapment” will hold the bather in its grip until either the vacuum is broken, or he or she drowns, defying the rescue efforts of onlookers.

SVRS: Safety Vacuum Release System

  • Self-monitoring, non-electrical and low maintenance
  • Easy to install within thirty minutes
  • An installation DVD is included with every unit
  • Long lasting design features moisture resistant PVC and stainless steel construction
  • Simple adjustment and manual reset
  • Meets all requirements of International Code Council
  • Won't damage your pump when tripped
  • 3-year limited warranty ensures reliability

Don’t take chances
with your pool or spa safety!


The Model VA-2000L SVRS unit also utilizes a check valve assembly equipped with a 3.5 pound spring, a poppet disc and a one-way (up only) vented poppet This check valve assembly permits continued water flow to the circulating pump while the SVRS unit is in the open or vented position. The 3.5 pound spring further compressed by the poppet disc, creates enough sealing force within the check valve to allow partial water flow to the circulating pump for suction lifts up to 3.5 feet. This is critical to the elimination of circulating pump damage that can be caused by a sustained dry-running condition. The one-way vented poppet allows the surge chamber to be internally recharged when the circulating pump is turned off.


*For pumps operating 24/7 we recommend installation of the VA-2000S (even if it's a lift application situation.

Item #VA2000L


Regular price $629.99 

  Back